[email protected]
1 (800)  897-2851
Truth Window Hardware
Select category
  • Select category
  • Skylight, Clerestory & Motorized
    • Manual Skylight Operators
    • Motorized Window Operators & Accessories
    • Pole Cranks & Accessories
  • Truth Hardware Sliding and Sash Components
  • Truth Window Hardware Awning
    • Awning Operator with Crank
      • Truth Hardare 'Entrygard' (11 Series)
      • Truth Hardware 'Encore' (51 Series)
      • Truth Hardware 'Maxim Narrow' (50 Series)
      • Truth Hardware 'Maxim' (51 Series)
      • Truth Hardware 'Scissors Arm' (11 Series)
      • Truth Hardware 'Scissors Arm' (22 Series)
      • Truth Hardware 'Shoe Stud' (11 Series)
      • Truth Hardware Awning Pivot Shoe (22 Series)
    • Awning Operator with Lever
      • 13-1/8" Width
      • 20-1/2" Width
      • 23-1/4" Width
    • Crank Handles and Cover
    • Hinges
      • 2 Bar Hinges
        • 10 Inches 2 Bar Hinges
        • 14 Inches 2 Bar Hinges
        • 18 Inches 2 Bar Hinges
        • 22 Inches 2 Bar Hinges
        • 26 Inches 2 Bar Hinges
      • 4 Bar Hinges
    • Locks, Keepers & Accessories
      • Locking Handles & Keepers
        • Locking Handle Gaskets
        • Locking Handle Keepers
        • Locking Handles
      • Multi-point Locks (Tie Bars) & Accessories
        • Keepers for Multi-point Locks
        • Link Assemblies
        • Multi-point Locks (Tie Bar Locks)
      • Sash Locks & Keepers
        • Sash Lock Keepers
        • Sash Locks
    • Push Bar Operator
    • Sash Hooks & Clips for Awning Operators
    • Shoes Glides & Clips for Awning Operators
    • Tie Bars & Accessories
      • Tie Bar Guides
      • Tie Bars
    • Tracks for Awning Operators
  • Truth Window Hardware Casement
    • Casement Window Operator
      • Dual Arm
        • 'Encore' (50 Series)
        • 'Entrygard' (15 Series)
          • 2-7/8" Clip Arm Length
          • 3-13/16" Clip Arm Length
          • 4-7/16" Clip Arm Length
        • 'Maxim' (50 Series)
      • Jointed Arm
        • 'Dyad' (23 Series)
        • 'Ellipse / Traditional' (15 Series)
        • 'Entrygard' (15 Series)
        • 'Maxim' (50 Series)
        • ‘Encore’ (50 Series)
      • Single Solid Arm
        • 'Ellipse / Traditional' (15 Series)
          • 13-1/2" Arm
          • 7-1/2'' Arm
          • 9-1/2" Arm
        • 'Encore' (52 Series)
        • 'Entrygard' (15 Series)
        • 'Roto Gear' (23 Series)
          • 11-1/2'' Arm
          • 13-1/2" Arm
          • 7-1/2" Arm
          • 9-1/2" Arm
    • Clips & Glides for Casement Operators
    • Crank Handles and Cover
    • Entrygard Truth Window Hardware Series
      • Truth 'Entrygard' (11 Series) Awning Operator
      • TRUTH ENTRYGARD Cover and Handle
      • Truth Entrygard Dual Arm (Dual Series) Casement Operator
        • 2-7/8" Short Arm Length
        • 3-13/16" Short Arm Length
        • 4-7/16" Short Arm Length
      • Truth Entrygard Lock
      • Truth Jointed Arm 'Entrygard' (15 Series) Casement Operator
      • Truth Single Arm 'Entrygard' (15.941 Series) Casement Operator
    • Hinges
      • 2 Bar Hinges
        • 10 Inches 2 Bar Hinges
        • 13 Inches 2 Bar Hinges
        • 14 Inches 2 Bar Hinges
      • 4 Bar Hinges
    • Limit Devices for Windows
    • Locks, Keepers & Accessories
      • Cam Handles & Keepers
      • Locking Handles & Keepers
        • Locking Handle Gaskets
        • Locking Handle Keepers
        • Locking Handles
      • Multi-point Locks (Tie Bars) & Accessories
        • Keepers for Multi-point Locks
        • Link Assemblies
        • Multi-point Locks (Tie Bar Locks)
      • Sash Locks & Keepers
        • Sash Lock Keepers
        • Sash Locks
    • Stud Brackets and Support Plates for Operators
    • Tie Bars & Accessories
      • Tie Bar Guides
      • Tie Bars
    • Tracks for Casement Operators
  • Uncategorized
  • Weatherstripping
    • Bulb Seal
    • Pile Weatherstripping
Login / Register
custom-icon 0 Wishlist
custom-icon 0 items / $0.00
Menu
Truth Window Hardware
0 items / $0.00
Browse Categories
  • Entrygard (15 Series)Entrygard (15 Series)
  • Encore (51 Series)
  • Maxim (50 Series)
  • Roto Gear (23.00 Series)Roto Gear (23.00 Series)
  • Ellipse / Traditional (15.30 Series)Ellipse / Traditional (15.30 Series)
  • Ellipse / Split Arm (15.18 Series)Ellipse / Split Arm (15.18 Series)
  • Dyad (23.40 Series)Dyad (23.40 Series)
  • Lever Operator (10 Series)Lever Operator (10 Series)
  • Roto Gear (11 Series)Roto Gear (11 Series)
  • Pivot Shoe (22.10 Series)Pivot Shoe (22.10 Series)
  • Commercial (22.20 Series)Commercial (22.20 Series)
  • WeatherstrippingWeatherstripping
  • Home
  • Cart
  • Contact Us
  • About Us
HomeShopTruth Window Hardware CasementCasement Window OperatorDual Arm'Maxim' (50 Series) Dual Arm Casement Operator ‘Maxim’ 10-3/8” (Truth Hardware 50.32.011) left hand
Previous product
Dual Arm Casement Operator 'Entrygard' UP link 4-7/16'' (Truth Hardware 15.101.001) Left Hand $61.50 $44.95
Back to products
Next product
Dual Arm Casement Operator 'Maxim' 8-3/4'' (Truth Hardware 50.04.32.011) $59.00
-22%
Click to enlarge

Dual Arm Casement Operator ‘Maxim’ 10-3/8” (Truth Hardware 50.32.011) left hand

$48.50 – $52.50

The Maxim Series Operators have a high-pressure die-cast zinc housing that is electrostatically coated. The E-Gard coated gear arms and drive worm are made of hardened steel. The #50.00 Dual Arm Operators are designed for windows 24″ to 40″ wide up to 84″ high with a maximum sash weight of 96 lbs. The Truth 50.32 Maxim Dual Arm is one of the more popular new style operators from Truth. This operator is the same as the 50.10 model (they are interchangeable), but with the painted steel cover riveted to it.

Common numbers sometimes found on this operator are 31876, 41011 and 41012.

Left Hand Shown

Order stud bracket, black pivot shoe and handle separately if needed (see related products below).

Click here for Color Chart

Product Spec Sheet PdfSpec Sheet PDF

Trustpilot
Clear
Compare
Add to wishlist
SKU: N/A Category: 'Maxim' (50 Series) Tags: 31538, 31538A, 31876, 41011, 41012, 50.00.32, Dual Arm Casement Operator 'Maxim' 10-3/8'' (Truth Hardware 50.32.011) left hand, Maxim Series, TH 24025, TH-24010, TH-24011, TH-24012, TH-24013, TH-24022, TH-24023, TH-24024
Share
Facebook Twitter Pinterest linkedin Telegram
  • Spec Sheet
  • Description
  • Shipping & Delivery
Spec Sheet

Product Spec Sheet PdfSpec Sheet PDF

WARRANTY: Protected under the terms of the “Truth Warranty for Window & Door Manufacturers & Authorized Distributors”. Refer to Truth’s Terms & Conditions for further details.

MATERIAL: High-pressure die-cast zinc operator housing, crank handle and knob. Hardened steel drive worm and gear. 300 series stainless steel packages are available for most models.

CORROSION RESISTANCE: Truth’s E-Gard® Hardware has a multi- stage coating process that produces a superior physical and aesthetic finish. Plus, it is resistant to a wider range of corrosive materials, including industrial cleaning materials and environmental pollutants. This proprietary process has been tested to be approximately three times better than common zinc plated finishes. For coastal applications, Truth also has stainless steel packages available (see Tech Note #7).

FINISH: Electrostatically applied, durable coatings provide excellent resistance to chipping, scratching and corrosion while maintaining color stability for years in direct sunlight. Please refer to Truth’s Color Chart for examples of Truth’s most popular finish options. Truth also offers a wide range of decorative “plated” finishes – contact Truth for additional information on availability of these finishes on specific product lines (see Truth Tip #9).

RECOMMENDED SCREWS: All Maxim Operator components have been designed to use the same standardized screw style and size, please refer to the drawings for further details. Coating compatibility between the screws and the operator components is very important in order to optimize the corrosion resistance performance. Refer to drawings for complete information on screw type and quantity needed (sold separately). For additional information regarding screw selection – see Truth Tips and Tech Note #11.

TRUTH TIPS:

  1. Operator base handing is determined by the window hinge side when viewed from the outside.
  2. Handing of the optional Maxim Nesting Cover is determined by the direction the handle points when in the nested position.
  3. For accurate hardware placement, pre-drilling of the screw holes in the window profile is recommended.
  4. For PVC and composite window applications, mounting screws should pass through two profile walls, or one wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended.
  1. For metal window profiles, Truth recommends machine screws. However, in most applications, sheet metal screws will provide adequate holding power.
  2. When operator is installed in high- rise applications over two stories, a Truth Limit Device, to restrict the amount of opening, is recommended. Contact Truth for wind load information.
  3. A Spline Cap (#21306) is available to protect the operator splines from dirt and other windows from damage during shipping, installation, and final building construction.
  4. Truth recommends that Snubbers be used on the hinge side on any casement window that has a tendency to bow outwardly at the center in the closed position. Adding Snubbers may increase the negative air pressure rating of a casement window.
  5. Decorative plated finishes are not recommended for coastal or highly corrosive environments.

INCLUDE TRUTH SPECS ON YOUR NEXT PROJECT Window operators shall be provided which allow easy adjustment of window position. The mechanism should be crank operated.

The operator must be constructed of E-Gard® coated components. High- pressure die-cast zinc operator base, crank handle and knob. Hardened steel drive worm and gear.

Window Operators shall be Maxim® Series Operators as manufactured by Truth Hardware, Owatonna, MN.

MAXIM® DUAL ARM OPERATOR

Drawings begin on pg. 25d.

  • Provides for egress or washability with the same operator in the same location thereby minimizing sill cover inventory.
  • Operates sash sizes up to 24″ to 40″ wide, and 84″ high and weighing up to 108 lbs. No need to change operators for standard and custom-sized windows.
  • Maxim Dual Arm provides over 7″ of washability with the standard Maxim® 13″ hinge and is compatible with Truth’s standard 10″ hinge, with reduced washability.
  • Maxim Dual Arm and Dyad Operators share standardized bracket and mounting location reducing inventory and manufacturing complexities.

ORDERING INFORMATION:

  1. Specify “standard” or “coastal” package.
  2. Order item number: #50.00 or #50.01 (low profile) or #50.02 (rear-mount)
  3. Specify finish number.
  4. Specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
  5. Select mounting hardware (sold separately). #12510.XX – LH Bracket #12511.XX – RH Bracket, or #11661.XX – LH Bracket (low profile) #11662.XX – RH Bracket (low profile)
Description

 

The easiest way to determine the handing of your casement window unit is from the interior (inside) of the home. If you have multiple windows, stand in front of each window in question and locate the locks. The lock location will determine the handing of the unit.

All casement hardware, which includes locks, operators and hinges, are handed based on the lock location when viewed from the interior.

Shipping & Delivery

Related products

Stud Bracket with Snap Stud (Truth Hardware 11276, 11277) (Right)
Compare
Close

Snap Stud Bracket (Truth Hardware 11.27.70)

$9.50
The #1127.70 E-Gard coated bracket is used with the 15 Series, the Maxim Series or the Encore Series Operators.
Add to wishlist
Add to cart
Quick View
Compare
Close

Crank Handle (Contour) (Truth Hardware 11454) (5/16″ Spline)

$11.68 – $13.50
Material: Die Cast For use on any geared or crank style Truth window or door operator (5/6 in. spline or spindle size - also known as an 11/32 in. spline or spindle size). This crank handle is a snap-on style handle. It doesn't have a set screw, but two springs instead. It can be easily removed by pulling.
Add to wishlist
Select options
Quick View
Compare
Close

Track Slider (Truth Hardware 31877.00.001)

$2.00
This #31877.00.001 is a replacement slider that is used with the #11576 Casement Track
Add to wishlist
Add to cart
Quick View
Stud Bracket with Snap Stud (Truth Hardware 12510, 12511) (Right)
Compare
Close

Snap Stud Bracket (Truth Hardware 12.51.11)

$9.50
The #12.51.11 E-Gard coated bracket is used with the 15 Series, the Maxim Series or the Encore Series Operators.
Add to wishlist
Add to cart
Quick View

Direct Window Parts

Window and Glazing Hardware Distributor

115 S Dakota St, Seattle
98134, WA, USA

Support:
[email protected]

Shipping Partners
Navigation
  • About Us
  • Contact Us
  • Return Policy
  • Privacy Policy
  • Terms and Conditions
Product categories
  • Skylight, Clerestory & Motorized 24
  • Truth Hardware Sliding and Sash Components 8
  • Truth Window Hardware Awning 159
  • Truth Window Hardware Casement 207
  • Weatherstripping 13
Trustpilot
Direct Window Parts 2017-2020

Shopping cart

close
Free shipping for billing over $250.00 - USA Continental States
0%
  • Menu
  • Categories
  • Entrygard (15 Series)Entrygard (15 Series)
  • Encore (51 Series)
  • Maxim (50 Series)
  • Roto Gear (23.00 Series)Roto Gear (23.00 Series)
  • Ellipse / Traditional (15.30 Series)Ellipse / Traditional (15.30 Series)
  • Ellipse / Split Arm (15.18 Series)Ellipse / Split Arm (15.18 Series)
  • Dyad (23.40 Series)Dyad (23.40 Series)
  • Lever Operator (10 Series)Lever Operator (10 Series)
  • Roto Gear (11 Series)Roto Gear (11 Series)
  • Pivot Shoe (22.10 Series)Pivot Shoe (22.10 Series)
  • Commercial (22.20 Series)Commercial (22.20 Series)
  • WeatherstrippingWeatherstripping
  • Home
  • Blog
  • Wishlist
  • Login / Register

Sign in

close

Lost your password?
No account yet? Create an Account
Scroll To Top
Close Bitnami banner
Bitnami