DESCRIPTION: necessarily match handing of Operator – refer to table within application drawing page, or contact Truth’s Technical Service Department for further information.

Optional brackets for unique profile applications are available – see Truth’s Stud Bracket & Track section, or contact Truth Hardware for further details.

#11576.XX – Track & Slider, or #32384.92 – Low profile track

Optional Accessories:

#11329.XX Folding Handle

#41211.XX LH Nesting Cover

#41212.XX RH Nesting Cover

#31882 – Gasket

#31883 – Gasket Applicator

#23058.92 – Backplate (required for Rear Mount options

#21306 – Protective red plastic spline cap.

MAXIM® DYAD OPERATOR

Drawings begin on pg. 25l.

• Designed for narrow windows, but will operate a frame width from 16″ to 32″, and up to 72″ high and a sash weight of 55 lbs.
• Fits in all profiles currently using the EntryGard® or Encore® Dyad operators.
• Maxim Dyad provides over 7″ of washability with the standard Maxim® 13″ hinge and is compatible with Truth’s standard 10″ hinge, with reduced washability.

ORDERING INFORMATION:

1. Specify “standard” or “coastal” package.
2. Order item number: #50.50 or #50.51 (low profile) or #50.52 (rear-mount)
3. Specify finish number.
4. specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
5. Select mounting hardware (sold separately).

   #12510.XX – LH Bracket

   #12511.XX – RH Bracket, or

   #11661.XX – LH Bracket (low profile)

   #11662.XX – RH Bracket (low profile)

NOTE: Handing of Brackets does not necessarily match handing of Operator – refer to table within application drawing page, or contact Truth’s Technical Service Department for further information.

Optional brackets for unique profile applications are available – see Truth’s Stud Bracket & Track section, or contact Truth Hardware for further details.

Optional Accessories:

#11329.XX Folding Handle

#41211.XX LH Nesting Cover

#41212.XX RH Nesting

#31882 – Gasket

#31883 – Gasket Applicator

#23058.92 – Backplate (required for Rear Mount options)

#21306 – Protective red plastic spline cap.

MAXIM® REVERSE DYAD OPERATOR

Drawings begin on pg. 25r.

• Uniquely designed for narrow windows and specialty windows like round tops, half round, trapezoid, garden, octagon and windows that require Butt Hinges.
• Will work on frame widths down to a minimum of 12″ depending upon the thickness of the frame.
• Uses a non-handed bracket which will help reduce inventory issues.

ORDERING INFORMATION:

1. Specify “standard” or “coastal” package.
2. Order item number:

   #50.70 or

   #50.71 (low profile) or

   #50.72 (rear-mount)

3. Specify finish number.
4. specify right- or left-hand (determined by the side the hinge is on when viewed from the outside).
5. Select mounting hardware (sold separately).

   #11674.XX – Non-Handed Bracket